These are the drivers that came with my EtherPortII card for A/UX 1.1.

They do work under A/UX 2.0 and the install.script has been changed for 2.0.
(This was a simple change: under 2.0, if BNET is configured in the system,
there is a file called bnet_dr in /etc/startup.d; under 1.1 it's called
BNET).

Although these drivers do work under 2.0, the EtherPort card can ONLY be used
for TCP/IP communication... no AppleTalk. Supposedly, Dayna (who now owns
the EtherPort line) is in the process of rewriting the drivers for 2.0.

One last thing: these drivers are for the OLDER version of the EtherPortII
card. It's bigger (about 10 inches)and uses Intel Technology: the part number
will on a label at the back of the board and will be one of the following:

	9800048-xx
	9800083-xx

Anyway, to install, copy all the files from the tar archive to /tmp. cd to
/tmp and type "csh install.script". A new kernel will be made. If for some
reason the machine won't boot after installing the drivers, copy the file
/ounix to /unix (under A/UX Startup) (/ounix is a copy of your pre-EtherPort
driver kernel).

Good Luck!
=======================================================================
#include <std/disclaimer.h>
                                 =:^)
           Jim Jagielski                    NASA/GSFC, Code 711.1
     jim@jagubox.gsfc.nasa.gov               Greenbelt, MD 20771

"Kilimanjaro is a pretty tricky climb. Most of it's up, until you reach
 the very, very top, and then it tends to slope away rather sharply."
